Affected Source

{
  "id": "MLC-T-ENV-000683",
  "term": "Affected Source",
  "field": "Environment",
  "definition": "1. Any stationary, area, or mobile source of a criteria pollutant(s) to which an EIP applies. This term applies to sources explicitly included at the start of a program, as well as sources that voluntarily enter (i.e., opt into) the program.\n\n2. The meaning given to it in 40 CFR 72.2\n\n3. Any shipbuilding or ship repair facility having surface coating operations with a minimum 1,000 liters (L) (264 gallons [gal]) annual marine coating usage that is subject to this subpart.\n\n4. Wood furniture manufacturing facility that is engaged, either in part or in whole, in the manufacture of wood furniture or wood furniture components and that is located at a plant site that is a major source as defined in 40 CFR part 63.2, excluding sources that meet the criteria established in § 63.800(a), (b) and (c) of this subpart.\n\n5. Defined in § 63.1310(a).\n\n6. Group of all equipment that comprise the POTW treatment plant.\n\n7. Collection of dryers, refiners, blenders, formers, presses, board coolers, and other process units associated with the manufacturing of plywood and composite wood products. The affected source includes, but is not limited to, green end operations, refining, drying operations (including any combustion unit exhaust stream routinely used to direct fire process unit(s)), resin preparation, blending and forming operations, pressing and board cooling operations, and miscellaneous finishing operations (such as sanding, sawing, patching, edge sealing, and other finishing operations not subject to other NESHAP). The affected source also includes onsite storage of raw materials used in the manufacture of plywood and/or composite wood products, such as resins; onsite wastewater treatment operations specifically associated with plywood and composite wood products manufacturing; and miscellaneous coating operations (defined elsewhere in this section). The affected source includes lumber kilns at PCWP manufacturing facilities and at any other kind of facility.\n\n8. Sewage sludge incineration unit as defined in §62.16045.\n\n9. Stationary source or group of stationary sources which, when fabricated (on site), erected, or installed meets the definition of “construct a major source” or the definition of “reconstruct a major source” contained in this section.\n\n10. Defined in § 63.480(a). [40 CFR 63.482 (CFR 2018)] 40 CFR 63.482 (CFR 2024)]\n\n11. All HAP emission points within a facility that are related to the production of BLR or WSR, including process vents, storage tanks, wastewater systems, and equipment leaks.\n\n12. Unit that is subject to any Acid Rain emissions reduction requirement or Acid Rain emissions limitation under § 72.6 or part 74 of this chapter.\n\n13. For the ethylene production (as defined in paragraph (e)(2) of this section) source category, the affected source comprises all emission points listed in paragraphs (e)(1)(i)(A) through (G) of this section that are associated with an ethylene production unit that is located at a major source, as defined in section 112(a) of the Act.",
  "references": [
    "40 CFR 51.491 (CFR 2013)",
    "40 CFR 71.2 (CFR 2013)",
    "40 CFR 63.782 (CFR 2013)",
    "40 CFR 63.801 (CFR 2013)",
    "40 CFR 63.1312 (CFR 2013)",
    "40 CFR 63.1595 (CFR 2013)",
    "40 CFR 63.2292 (CFR 2013)",
    "40 CFR 62.16045 (CFR 2018)",
    "40 CFR 63.41 (CFR 2018)",
    "EPA EV-Regulatory Activities-Regulatory Roles",
    "40 CFR 63.522 (CFR 2018)",
    "40 CFR 72.2 (CFR 2013)",
    "85 FR 40386; 40 CFR 63.1103 (CFR 2021)"
  ],
  "url": "https://mlchart.com/terminology/environment/affected-source/"
}