Dip Coating

Term · Environment · MLC-T-ENV-008010

1. A part is dipped or immersed in a resin solution. After the part is removed from the solution and excess coating is drained, the part is air-dried or baked. This coating method is useful for irregularly shaped parts. In flow coating, a method similar to dip coating, plastic coating is poured or sprayed on the part and allowed to drain by gravity.

2. Method of applying coatings in which the part is submerged in a tank filled with the coatings.

Table 1. Record
Identifier	MLC-T-ENV-008010
Field	Environment
References	EPA Preferred and Alternative Methods for Estimating Air Emissions from Plastic Products Manufacturing at http://www.epa.gov/ttnchie1/eiip/techreport/volume02/ii11.pdf; 40 CFR 60.311 (CFR 2013)

Record as JSON

{
  "id": "MLC-T-ENV-008010",
  "term": "Dip Coating",
  "field": "Environment",
  "definition": "1. A part is dipped or immersed in a resin solution. After the part is removed from the solution and excess coating is drained, the part is air-dried or baked. This coating method is useful for irregularly shaped parts. In flow coating, a method similar to dip coating, plastic coating is poured or sprayed on the part and allowed to drain by gravity.\n\n2. Method of applying coatings in which the part is submerged in a tank filled with the coatings.",
  "references": [
    "EPA Preferred and Alternative Methods for Estimating Air Emissions from Plastic Products Manufacturing at http://www.epa.gov/ttnchie1/eiip/techreport/volume02/ii11.pdf",
    "40 CFR 60.311 (CFR 2013)"
  ],
  "url": "https://mlchart.com/terminology/environment/dip-coating/"
}

Record 8,010 of 30,736 in Environment terminology (MLC-0121). Request the full dataset.