Emissions limitation

{
  "id": "MLC-T-ENV-009396",
  "term": "Emissions limitation",
  "field": "Environment",
  "term_source": "Emissions Limitation",
  "definition": "1. Any emission limit, opacity limit, operating limit, or visible emissions limit.\n\n2. Applicable requirement that constitutes an emission limitation, emission standard, standard of performance or means of emission limitation as defined under the Act. An emission limitation or standard may be expressed in terms of the pollutant, expressed either as a specific quantity, rate or concentration of emissions (e.g., pounds of SO2 per hour, pounds of SO2 per million British thermal units of fuel input, kilograms of VOC per liter of applied coating solids, or parts per million by volume of SO2) or as the relationship of uncontrolled to controlled emissions (e.g., percentage capture and destruction efficiency of VOC or percentage reduction of SO2). An emission limitation or standard may also be expressed either as a work practice, process or control device parameter, or other form of specific design, equipment, operational, or operation and maintenance requirement. For purposes of this part, an emission limitation or standard shall not include general operation requirements that an owner or operator may be required to meet, such as requirements to obtain a permit, to operate and maintain sources in accordance with good air pollution control practices, to develop and maintain a malfunction abatement plan, to keep records, submit reports, or conduct monitoring.\n\n3. For the purposes of this subpart, the concentration of total chromium allowed to be emitted expressed in milligrams per dry standard cubic meter (mg/dscm), or the allowable surface tension expressed in dynes per centimeter (dynes/cm).",
  "subject": "Regulatory activities",
  "references": [
    "40 CFR 63.1990 (CFR 2013); 40 CFR 63.1990 (CFR 2020)",
    "40 CFR 64.1 (CFR 2018)",
    "40 CFR 63.341 (CFR 2018)"
  ],
  "url": "https://mlchart.com/terminology/environment/emissions-limitation/"
}